How to Turn Off Peloton Screen [And Adjust Sleep Mode]

Have you been wondering how to turn off your Peloton bike? Do you just let it sleep after your done? Well, you’re in luck! In this article, we’ll explore the ins and outs of turning off your Peloton bike, including why it’s important to do so.

Turning off your Peloton bike is not only easy but also beneficial for a couple of reasons. Firstly, it helps you save energy and reduce your electricity consumption. Secondly, it can prevent any potential short circuits or damage to the bike, especially during storms or power outages.

So let’s dive into the steps you need to take to power down your Peloton bike safely, ensuring you’re doing it the right way and protecting both your energy usage and the longevity of your equipment.

How to Properly Turn Off Your Peloton Bike

Properly turning off your Peloton bike is important to save energy and prevent any potential short circuiting. Follow these steps to ensure a safe and efficient shutdown:

1. Locate the power button on the back of your Peloton bike.
2. Press and hold the power button until the screen turns off and the bike powers down. DON’T just tap it – that will just put it in sleep mode. You need to hold it down for a few seconds.
3. Once the bike is turned off, unplug it from the power outlet.

By turning off your Peloton bike when not in use, you can conserve energy and reduce electricity consumption.

Now unplugging your Peloton isn’t AS important – however, if you are dealing with heavy storms, I would advise to do so.

We had a bad storm here (in Texas) and had the Peloton plugged in to the outlet. After a brief power outage – the outlet no longer worked.

Why Would You Want to Turn Off the Peloton Screen?

So besides the reason I mentioned, there can be various reasons why you might want to turn off the Peloton screen. Here are a few possible scenarios:

Energy Savings and Reducing Electric Bill

By turning off the Peloton screen when you’re not using it, you can save energy and potentially reduce your electric bill. It won’t be huge, but hey, every penny counts – right?

Privacy Concerns

If you have privacy concerns and don’t want the Peloton screen to display any personal information or data, turning it off can provide peace of mind.

Screen Maintenance or Extending Lifespan

By turning off the Peloton screen when not in use, you can reduce wear and tear, potentially extending its lifespan and minimizing the need for repairs or replacements.

In the next section, we will walk you through the step-by-step guide on how to turn off the Peloton screen.

Can You Put the Peloton Screen on Sleep Mode?

Yes, the Peloton screen can be put on sleep or standby mode if you prefer to temporarily disable the display without fully turning off the device. Sleep mode allows your Peloton product to conserve power while still being able to receive software and firmware updates. By default, Peloton automatically enters sleep mode after 20 minutes of inactivity. However, you can adjust this timer according to your preferences. Follow these steps to update the sleep mode timer:

• To adjust the sleep mode timer, access the settings menu on your touchscreen by tapping “Settings” in the top right corner.
• From the settings menu, select “Device Settings” and then navigate to “Display” followed by “Screen Timeout.”
• Choose the desired sleep mode timer from the available options: 15 seconds, 30 seconds, 1 minute, 2 minutes, 5 minutes, 10 minutes, 15 minutes, or 20 minutes.
• Once you’ve selected your preferred sleep mode timer, your Peloton will automatically enter sleep mode after the specified period of inactivity.

Using sleep mode can be convenient if you plan to resume your workout shortly or want to quickly access the Peloton screen without waiting for it to fully boot up – which, admittedly, takes quite a long time sometimes.

Benefits of Sleep Mode

If you prefer to keep your Peloton running, sleep mode offers a few key benefits for Peloton users. Here are some advantages of using sleep mode on a Peloton screen:

• Energy conservation: Sleep mode will still help to reduce power consumption, allowing you to save energy and contribute to a more eco-friendly environment.
• Extended screen lifespan: By putting the screen into sleep mode when not in use, you can help extend its overall lifespan and preserve its performance over time.
• Reduced eye strain: Enabling sleep mode decreases the screen brightness, providing relief to your eyes if you’re using the Peloton in a dimly lit environment or before going to bed.
• Firmware Updates: While in sleep mode, Peloton can still receive and install firmware updates.

In the following section, we will provide step-by-step instructions on how to enable or disable sleep mode on the Peloton screen.

Is It Bad for the Peloton Screen to stay on?

Leaving the Peloton screen on (with NO sleep mode) for long periods can have potential effects on the device. While the screen itself is designed to handle extended use, there are a few considerations to keep in mind.

Potential Screen Burn-in

Extended periods of displaying static images or leaving the screen on without any activity can lead to screen burn-in. This occurs when certain elements, such as logos or persistent graphics, become permanently etched into the screen, causing visible “ghosting” or distortions in the display. To prevent screen burn-in, it is advisable to avoid leaving the screen on for long durations without any screen-saving measures.

Elevated Energy Consumption

Keeping the Peloton screen on for extended periods may lead to increased energy consumption. Consider turning off the screen or using sleep mode when not in use to minimize energy waste.

Potential Component Wear and Tear

Continuously leaving the screen on for long durations may subject the internal components to unnecessary wear and tear. While Peloton screens are designed to withstand regular use, prolonged periods of standby may place additional strain on the device’s hardware. To prolong the lifespan of the screen and other components, it is recommended to turn off the screen or utilize sleep mode when not in use.

Conclusion

Properly turning off your Peloton bike is crucial for saving energy and preventing any potential short circuiting. By following the simple steps outlined above, you can ensure a safe and efficient shutdown of your bike. Remember to unplug it from the power outlet when not in use to conserve energy and reduce electricity consumption. If you prefer to keep it on – opt for mayber a shorter sleep mode window.

We hope these tips have been helpful and provide you with the knowledge to properly shut down and maintain your Peloton screen. Keep saving energy and staying safe!